tai-saw technology co., ltd. fr-71s03-01 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com approval sheet for product specification issued date: nov, 28, 2003 product name: saw filter 243 mhz smd 5.0x7.0 mm tst parts no.:TB0208A customer parts no.: company: division: approved by : date: checked by: bob chau approval by: francis chen date: nov, 28, 2003
tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com saw filter 243mhz model no.:TB0208A rev. no.:1 a. maximum rating: 1. input power level: 10 dbm 2. dc voltage : 15v 3. operating temperatur e: -25c to 60c 4. storage temperatur e: -30c to 70c b. electrical characteristics : item unit min. type. max. note center frequency, fc mhz - 243 - 1 minimum insertion loss, ( fc 25khz ) il db - 3.7 6.0 1 passband ripple ( fc 25khz ) db - 0.2 1.0 1 group delay ripple ( fc 25khz ) , gd s - 0.5 2.0 1 a ttenuation:(reference level from min il) fc - 115 to fc ? 1 mhz db 50 63 - - fc - 1 to fc ? 0.6 mhz db 42 64 - - fc ? 0.6 to fc ? 0.4 mhz db 29 68 - - fc + 0.4 to fc + 0.6 mhz db 29 64 - - fc + 0.6 to fc + 1 mhz db 42 63 - - fc + 1 to fc + 115 mhz db 50 55 - - note1. the standard definitions is in jis c 6703 z in =721.38 ? // -2.93pf z out =721.38 ? // -2.93pf source impedance 50 ? load impedance 50 ? rohs compliant lead free lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document c.outline drawing: d. measurement circuit: 50 ohm test circuit ( singl e-ended / single-ended ) pin configuration #9 input #4 output #10 balance input or input ground #5 balance output or output ground #1,2,3,6,7,8 to be grounded date code unit mm 50? hp network analyzer 50? saw filter l1=120 nh in out l1=120nh 9 4 5 1,2,3,6,7,8 10 c1=0.4 pf c1=0.4 pf 2 0 8 t b
tai-saw technology co., ltd. 4 tst dcc release document e. frequency characteristics :
tai-saw technology co., ltd. 5 tst dcc release document
tai-saw technology co., ltd. 6 tst dcc release document 208 tb f. packing : 1. reel dimension 2.tape dimension
|
